|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
TESTING GU (General Use) Type SOP Series [2-Channel (Form A Form B) Type] FEATURES 4.4 .173 2.1 .083 PhotoMOS RELAYS Applicable for 1 Form A 1 Form B use as well as two independent 1 Form A and 1 Form B use Controls low-level analog signals PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion 5. Low-level off state leakage current 9.37 .369 1. 2 channels in super miniature design The device comes in a super-miniature SO package measuring (W) 4.4 x (L) 9.37 x (H) 2.1 mm (W) .173x (L) .369x (H) .083 inch --approx. 38% of the volume and 66% of the footprint size of DIP type PhotoMOS Relays. mm inch (DIP) Volume (SOP) Approx. 38% 1 2 3 4 N.C. 8 7 6 5 Approx. 66% Footprint N.O. TYPICAL APPLICATIONS * Telephones * Measuring instruments * Computer * Industrial robots * High-speed inspection machines. 2. Tape and reel The device comes standard in a tape and reel (1,000 pcs./reel) to facilitate automatic insertion machines. TYPES 1. AC/DC type Output rating* Load voltage Load current 350 V 100 mA Part No. Picked from the 1/2/3/4-pin side Picked from the 5/6/7/8-pin side AQW610SX AQW610SZ Packing quantity in tape and reel 1,000 pcs. *Indicate the peak AC and DC values. Notes: (1) Tape package is the standard packing style. Also available in tube. (Part No. suffix "X" or "Z" is not needed when ordering; Tube: 50 pcs.; Case: 1,000 pcs.) (2) For space reasons, the package type indicator "X" and "Z" are omitted from the seal. RATING 1. AC/DC type 1. Absolute maximum ratings (Ambient temperature : 25C 77F) Item LED forward current LED reverse voltage Peak forward current Power dissipation Load voltage (peak AC) Continuous load current Symbol IF VR IFP Pin VL IL Ipeak Pout PT Viso Topr Tstg AQW610S 50 mA 3V 1A 75 mW 350 V 0.1 A (0.13 A) 0.3 A 600 mW 650 mW 1,500 V AC -40C to +85C -40F to +185F -40C to +100C -40F to +212F Remarks Input f = 100 Hz, Duty factor = 0.1% Output Peak load current Power dissipation Total power dissipation I/O isolation voltage Operating Temperature limits Storage Peak AC, DC ( ): in case of using only 1a or 1b, 1 channel 100 ms (1 shot), VL = DC Non-condensing at low temperatures 1 AQW610S 2. Electrical characteristics (Ambient temperature : 25C 77F) Item LED operate current Input LED reverse current LED dropout voltage On resistance Output Off state leakage current Operate time* Reverse time* I/O capacitance Initial I/O isolation resistance Note: Recommendable LED forward current IF = 5 mA. *Operate/Reverse time 1) N.O. Input Input Symbol Typical Maximum Minimum Typical Typical Maximum Typical Maximum Maximum Typical Maximum Typical Maximum Typical Maximum Minimum IFon IFoff VF Ron Ileak Ton Toff Ciso Riso AQW610S 0.9 mA 3 mA 0.4 mA 0.8 mA 1.14 V (1.25 V at IF = 50 mA) 1.5 V 18 25 1 A 0.28 ms (N.O.), 0.52 ms (N.C.) 1.0 ms 0.04 ms (N.O.), 0.23 ms (N.C.) 1.0 ms 0.8 pF 1.5 pF 1,000 M Condition IL = Max. IL = Max. IF = 5 mA IF = 5 mA (N.O.) IF= 0 mA (N.C.) IL = Max. Within 1 s on time IF = 0 mA (N.O.) IF= 5 mA (N.C.) VL = Max. IF = 0 mA 5 mA IL = Max. IF = 5 mA 0 mA IL = Max. f = 1 MHz VB = 0 500 V DC For type of connection, see page 32. Transfer characteristics 2) N.C. 90% Output Ton Toff Toff Ton 10% Output 10% 90% REFERENCE DATA 1. Load current vs. ambient temperature characteristics Allowable ambient temperature: -40C to +85C -40F to +185F Using only 1 channel 2. On resistance vs. ambient temperature characteristics Measured portion: between terminals 5 and 6, 7 and 8; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 50 Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) On resistance, 3. Opearte time vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 1.0 Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) Operate time, ms 0.8 130 120 Load current, mA 100 80 60 40 Using 2 channels 40 30 0.6 20 0.4 10 20 0 -40 -20 0 -40 -20 0 20 40 60 80 85 0.2 0 20 40 60 80 85 0 -40 -20 0 20 40 60 80 85 Ambient temperature, C Ambient temperature, C Ambient temperature, C 2 AQW610S 4. Reverse time vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 1.0 LED operate current, mA Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) Reverse time, ms 0.8 5. LED operate current vs. ambient temperature characteristics Load voltage: Max. (DC); Continuous load current: Max. (DC) 5 Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) 4 6. LED Reverse current vs. ambient temperature characteristics Load voltage: Max. (DC); Continuous load current: Max. (DC) 5 LED reverse current, mA Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) 4 0.6 3 3 0.4 2 2 0.2 1 1 0 -40 -20 0 20 40 60 80 85 100 0 -40 -20 0 20 40 60 80 85 0 -40 -20 0 20 40 60 80 85 Ambient temperature, C Ambient temperature, C Ambient temperature, C 7. LED dropout voltage vs. ambient temperature characteristics LED current: 5 to 50 mA 1.5 LED dropout voltage, V 1.4 1.3 1.2 1.1 1.0 0 50mA 30mA 20mA 10mA 5mA 8. Voltage vs. current characteristics of output at MOS portion Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25C 77F 140 Between terminals 120 5 and 6(N.O.) Between terminals 100 7 and 8(N.C.) 80 60 40 20 -3 -2.5 -2 -1.5 -1 -0.5 Current, mA 0.5 1 1.5 2 2.5 3 -20 Voltage, V -40 -60 -80 -100 -120 -140 9. Off state leakage current Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25C 77F Off state leakage current, A 10 -3 Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) 10 -6 10 -9 10 -12 -40 -20 0 20 40 60 80 85 Ambient temperature, C 0 20 40 80 60 Load voltage, V 100 10. LED forward current vs. operate time characteristics Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25C 77F 5 Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) 11. LED forward current vs. reverse time characteristics Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25C 77F 0.5 Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) Reverse time, ms 0.4 12. Applied voltage vs. output capacitance characteristics Measured portion: between terminals 5 and 6, 7 and 8; Frequency: 1 MHz; Ambient temperature: 25C 77F 120 Output capacitance, pF Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) 100 80 60 40 20 0 Operate time, ms 4 3 0.3 2 0.2 1 0.1 0 0 10 20 30 40 50 60 0 0 10 20 30 40 50 60 0 10 20 30 40 50 60 LED forward current, mA LED forward current, mA Applied voltage, V 5/7/2001 All Rights Reserved, (c) Copyright Matsushita Electric Works, Ltd. 77 |
Price & Availability of AQW610SZ |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |